C051C
Multi-axis Acceleration Sensor Module A Range/Performance
Module A delivers yaw rate and accelerations along several axes, but at least one channel sits outside what the vehicle's motion allows, for example a turn rate while parked or a lateral g that does not fit speed and steering. No manufacturer documents C051C publicly, so exact limits are unknown. Patents show why such checks matter: in a Kelsey-Hayes (now ZF) filing a sensor tilted by 5 degrees reports about 8.7 deg/s of yaw during a hard pitch, while stability control typically reacts at 3 to 7 deg/s; an Autoliv patent tracks slowly creeping offsets with a moving average. Unlike the calibration and correlation codes, here the reading itself is implausible. Stability control usually switches off with its warning lamp lit.
Possible causes
- Module A loose, tilted or mounted on a deformed bracket high
- Internal offset of the inertial sensor drifted beyond tolerance medium
- Defective sensing element inside module A medium
- Wrong module variant fitted or installed in the wrong orientation low
Symptoms
- ESC or traction control warning lamp on
- Stability control unavailable or intervening without reason
- Yaw rate or acceleration not zero at standstill (scan tool)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C051C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.