C0519
Right Front Wheel Speed Sensor - Mechanical
C0519 is the mechanical-fault code for the right front sensor. It appears in code lists, but no manufacturer publishes a setting rule for it; the known diagnostics put such faults under range, erratic or correlation codes. What goes wrong mechanically at a front wheel is documented in GM bulletin PIT5707: on 2020 Silverado and Sierra HD trucks, manufacturing debris on the reluctor ring set C0504 or C050A, and the cure was cleaning the ring without a magnet, sometimes with the front hub removed. Allegro explains why geometry matters at all: the magnetic field reaching a Hall sensor weakens steeply as the air gap grows, so a sensor that is not fully seated, a bent bracket or bearing play can leave the signal too weak to read.
Possible causes
- Metal debris or rust buildup on the right front reluctor ring high
- Sensor not fully seated or bracket bent, air gap too large medium
- Right front hub bearing worn medium
Symptoms
- ABS lamp and stability service message
- ABS may regulate unexpectedly at walking pace
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0519
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.