OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0518

Left Front Wheel Speed Sensor - Mechanical

C0518 points to a mechanical rather than electrical problem at the left front speed sensor: wrong part, wrong position, a damaged or soiled encoder, or play in the hub. No manufacturer documents this exact code publicly; GM's tables and Mitsubishi's index file such faults under range or correlation codes instead. The mechanics are well described elsewhere. GM bulletin PIT5950 for Silverado and Sierra 1500 warns that left and right front sensors look alike, that a swapped part keeps setting codes, and that the flat side of the tip must face the magnetic encoder ring on the wheel bearing. An Infiniti bulletin asks technicians to check the sensor head and the encoder for dirt, cracks, missing teeth, corrosion and looseness, since contamination alone can cause intermittent faults.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 18

Possible causes

  • Sensor for the other side fitted or tip turned away from the encoder medium
  • Magnetic encoder or tone ring dirty, cracked or missing teeth high
  • Worn or loose left front hub bearing changing the air gap medium

Symptoms

  • ABS and stability lamps on, often recurring after a repair
  • Uneven or missing left front speed reading at low speed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0518

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication