C0510
Left Rear Wheel Speed Sensor A Intermittent/Erratic
C0510 flags a left rear speed signal that jumps instead of changing smoothly. GM's 19OBDG03D EBCM logic counts every moment in which the unfiltered wheel acceleration exceeds 491 m/s² at vehicle speeds beyond 3.58 m/s and sets the code once that tally reaches 40 s; a second path latches it within 25 ms when more than 55 edges arrive too quickly. GM names loose mounting, missing teeth on the tone ring and electromagnetic interference as causes. Mitsubishi's C1065-38 runs between 10 and 60 km/h and counts as C0510 after two trips. On the rear axle, load matters: a Stellantis STAR case for the Ram 3500 describes erratic rear sensor codes only with payload or a trailer on rough pavement, without a part fault.
Possible causes
- Sensor loose in its bore or play in the rear wheel bearing high
- Missing or damaged teeth, rust flakes on the tone ring medium
- Wire breaking up intermittently as the rear suspension moves medium
- Heavy payload or trailer on rough roads (Ram 3500 case) low
Symptoms
- ABS or stability lamp on after bumps, railway crossings or rumble strips
- Brief, unexpected ABS pulsing at the rear
- Fault often gone after the next ignition cycle
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0510
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.