OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C050D

Left Rear Wheel Speed Sensor A Range/Performance

C050D says the left rear signal exists but is not trustworthy. In GM's 23OBDG07 tables several checks share this code: a weak magnetic flux under 2.2 mT across at least five wheel turns (detected after 8 s at 3.1 mph or 22 s at 1.24 mph), missing standstill pulses for 3.6 s, and an undervoltage on the sensor supply; all are Type B with two trips, and the tables list Bosch, Continental and DF11i sensor variants. GM's 2019 tables add a grey-zone current between 7 and 28 mA for 750 ms. Stellantis lists C050D as a left rear plausibility error in PCM reflash bulletins such as 18-075-20 for the 2018 Jeep Compass. Mitsubishi files C1065-92 as C050D and points to tire size and the sensor rotor.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 0D

Possible causes

  • Air gap to the rear encoder too large (sensor not seated, worn or loose hub bearing) high
  • Contact resistance or leakage in the rear sensor wiring medium
  • Left rear tire differs in rolling circumference medium
  • Control module software sets the code falsely (Stellantis reflash) low

Symptoms

  • ABS and stability lamps come on only after some driving
  • Stability or traction control intervenes without reason at low speed
  • Code may be stored without a lit MIL on some Stellantis models

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C050D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication