OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C050C

Left Rear Wheel Speed Sensor A Circuit/Open

C050C is stored when the brake controller loses the current path to the left rear speed sensor. GM's 2023 OBD tables (23OBDG07) read 0.12 s at under 3.8 mA in the signal wire as a ground short or a break and rate the code Type A, so the MIL can come on in the first trip. Mitsubishi lists C1065-13 of the Outlander PHEV as C050C, detected within one second, with ABS, ASC and engine lamps lit. Its fail-safe list shows what a dead rear sensor costs: besides ABS, EBD and stability control, the electric parking brake function is suspended. The rear harness runs past the trailing arm or axle and flexes with every bump, which makes chafed or pulled leads typical; a sensor with an internal open is the other usual finding.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 0C

Possible causes

  • Sensor lead chafed or torn where it follows the rear suspension high
  • Left rear sensor connector corroded or not latched medium
  • Left rear sensor open internally medium

Symptoms

  • ABS and stability warning lamps on right after key-on, check-engine lamp on some makes
  • ABS, stability control and on some models electric parking brake functions restricted
  • Live data shows no left rear wheel speed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C050C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication