OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C050A

Right Front Wheel Speed Sensor A Intermittent/Erratic

C050A is the erratic-signal code for the right front sensor. GM's 2019 tables show how this is judged: an unfiltered wheel acceleration above 491 m/s² feeds a counter that latches the fault at 40 s and decays again on clean readings, so only persistently unrealistic jumps set it; a separate check trips when the edge count exceeds 55 (25 ms). Listed causes are a loosely mounted sensor, missing tone-ring teeth and electromagnetic interference. GM preliminary information PIT5707 for 2020 Silverado and Sierra HD trucks found metal debris on the front reluctor ring; its labor time for removing the hub and cleaning is 1.1 h. HELLA adds heavy dirt and increased bearing play as typical sensor faults. Mitsubishi assigns C1063-38 to C050A with a two-trip MIL.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 0A

Possible causes

  • Metal debris or heavy dirt on the right front reluctor ring high
  • Missing tone-ring teeth or excessive wheel bearing play medium
  • Electromagnetic interference or intermittent contact in the harness low

Symptoms

  • ABS lamp and stability system message that appear and disappear
  • Pulsing brake pedal or ABS action at low speed without wheel lock

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C050A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication