OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0508

Right Front Wheel Speed Sensor A Circuit Low

C0508 reports the right front sensor circuit below range. A 2024 Jeep Wrangler case from the Stellantis STAR center shows a typical picture: after an earlier repair the ABS lamp came on with C0508-00, ABS disabled and implausible-speed network codes; the sensor harness had been pinched and only needed rerouting. Audi's bulletin 2061331/1 for 2017–2021 A4 and A5 family cars stores C050800 as short to ground when a wire is poorly crimped in the front sensor connector. GM's 2023 tables use C0508 for signal patterns that the current, supply and voltage monitors cannot classify as either a fault or a valid signal (0.12 s, Type A). Mitsubishi's C1063-11 covers short and open circuits on the right front and also lights the parking brake warning.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 08

Possible causes

  • Sensor harness pinched or misrouted after suspension or brake work high
  • Poorly crimped terminal in the sensor connector (Audi) medium
  • Right front sensor shorted internally low

Symptoms

  • ABS lamp on, often right after a repair
  • Additional network codes about implausible wheel or vehicle speed
  • Parking brake warning on some models

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0508

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication