OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0507

Right Front Wheel Speed Sensor A Range/Performance

C0507 flags an implausible right front speed signal. In GM's 2019 tables the brake module's ASIC watches the sensor current itself: a level hanging in the grey zones between 7 and 14 mA or 14 and 28 mA for 750 ms points to a high-resistance harness or leakage to battery voltage. Those bands sit between the base, data and speed-pulse levels Allegro lists for AK-protocol sensors. Further C0507 checks there look at standstill pulse width and timing. Mitsubishi assigns C1063-92, evaluated from 10 to 60 km/h. Stellantis bulletins show engine controllers storing the code too, for example on the 2016 Jeep Renegade 2.4 (18-061-16) and the 2026 Dodge Charger Sixpack (18-022-26); for the Charger, the bulletin blames a monitor lacking robustness and prescribes reprogramming.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 07

Possible causes

  • Corroded contacts or damaged insulation causing resistance or leakage current high
  • Damaged tone ring or wrong tire size on the right front medium
  • Engine controller software storing the code falsely (Stellantis) low

Symptoms

  • ABS/ESC lamps after driving off
  • Code present only in the engine controller during a full vehicle scan

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0507

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication