C0506
Right Front Wheel Speed Sensor A Circuit/Open
C0506 reports an open or grounded circuit at the right front wheel speed sensor. GM's 2023 tables describe it as a grounded or interrupted line, recognized from the signal-line current: below 3.8 mA for 0.12 s, Type A, and only evaluated after the start-up sensor test has finished without a supply undervoltage. On GM's 2019 platform an open drawing under 3.5 mA is filed as C0508 instead, so the same broken wire can carry different numbers. Mitsubishi assigns C1063-13 to C0506 and warns not to replace the ABS unit for a code that is stored but not active; it may simply mean the car was not driven after the last repair. HELLA advises checking supply voltage and wiring with a multimeter, as the internal resistance of active sensors cannot be measured.
Possible causes
- Broken wire or open contact between ABS module and right front sensor high
- Right front sensor failed open medium
- Old stored code after repair, vehicle not yet driven low
Symptoms
- ABS, ESC and traction control lamps on from start-up
- Right front wheel speed reads zero in live data
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0506
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.