OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0500

Left Front Wheel Speed Sensor A Circuit/Open

C0500 flags lost continuity in the left front wheel speed sensor circuit. An active sensor draws a steady current even with the car parked; Allegro gives 7 and 14 mA as the usual levels of a two-wire interface, so a reading near zero means a broken path. GM's 2016 hybrid OBD tables set C0500 once the signal-line current stays under 3.8 mA for 0.12 s, rated Type A (MIL on the first trip), and suppress it while C05A4 reports a low sensor supply. Mitsubishi maps C1061-13 to C0500 with a delay of at most 1 s and the check-engine lamp after one trip. Unrelated: a Stellantis brake bulletin for the 2022–2023 Wagoneer uses C0500-00 for a hydraulic leak. With this code ABS, stability and traction control shut down.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 00

Possible causes

  • Sensor plug corroded or loose, or a wire broken along the wheel arch high
  • Left front sensor open internally medium
  • ABS module supply, fuse or fusible link faulty (Mitsubishi lists these) low

Symptoms

  • ABS, ESC and traction control warning lamps on, check-engine lamp on some makes
  • ABS, stability control and hill start assist unavailable
  • Scan tool shows no left front wheel speed while driving

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0500

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication