OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0499

Lateral Acceleration Sensor Range/Performance

C0499 is missing from the accessible J2012 lists. GM bulletin PIP5094 names C0499 next to C0498 without saying what it stands for, so no manufacturer confirms a lateral acceleration meaning; the established code with this title is C0185. The title describes a lateral acceleration reading that is wired correctly but implausible. Saab explains that its ESP unit compares measured lateral acceleration with what the steering angle implies. A Ford patent derives a road-bank angle from lateral acceleration and steering angle, accepts an accelerometer fault only while the car is stable, then disables brake control until the next key-on and warns the driver. The ZF thesis from Linköping detected offset and drift faults of this sensor with model residuals.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number4 / 99

Possible causes

  • Offset or drift of the lateral acceleration sensor high
  • Sensor cluster loose or not mounted level medium
  • Steering angle reference not calibrated low

Symptoms

  • ESC lamp on, stability control switched off until restart
  • Unexpected ESC interventions on banked roads

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0499

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication