C0498
Lateral Acceleration Sensor Circuit
C0498 is in none of the accessible J2012 lists. GM does use the number: bulletin PIP5094, a terminal-test reminder for GM cars and light trucks of 2014 and earlier, names C0498 and C0499 among many chassis codes, but without any wording, so GM's meaning stays undocumented and a lateral accelerometer fault is not confirmed; the established code with this title is C0186. The part itself is a capacitive sensor whose middle plate swings between two fixed plates under sideways force. On the Saab 9-5 it puts out 0–5 V, about 2.6 V straight ahead, and the ESP module recognises a broken wire or one shorted to ground or battery. A GM EBCM shows the same signal as 0–5 V. Losing it takes away a key ESC input.
Possible causes
- Open circuit or short in the signal, reference or ground wire high
- Loose or corroded connector at the sensor cluster medium
- Lateral acceleration sensor defective medium
Symptoms
- Stability control unavailable, ESC lamp depending on the make
- Lateral acceleration reads a fixed value on the scan tool
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0498
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2013/MC-10112857-9999.pdf
- saabwisonline.com/9-5-9600/2004/5-brakes/stabiliser-system-esp/technical-description/yaw-rate-sensor-lateral-acceleration-sensor
- saabwisonline.com/9-5-9650/2010/3-electrical-system/bus-and-diagnostics-communication/technical-data/electronic-brake-control-module-scan-tool-information