OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0460

Steering Position Signal Implausible

C0460 is not in the accessible J2012 lists; GM and Saab use it for the steering angle signal. On the 2016 Malibu the EBCM sets it after a brief low-voltage event, and turning lock to lock with ignition on resets the sensor (16-NA-151). On 2017–2018 XT5 and Acadia, C0460 symptom 5A in the power steering module came from a sensor trim error and is fixed by reprogramming (17-NA-284); PIE0481A pairs it with C0545 on 2009–2012 Malibu, G6 and Aura. The Saab 9-3 sets it if the angle rate passes 3000°/s, the computed offset passes 18°, the angle exceeds ±720° or freezes. Lotus uses C0460 for something else: the pressure sensor in Bosch ESP8 units, often tripped by a misadjusted brake light switch.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number4 / 60

Possible causes

  • Brief low voltage leaving the sensor uninitialised high
  • Sensor trim error or control module software (GM 17-NA-284) medium
  • Angle offset after alignment or steering work medium
  • Steering angle sensor or column module defective low

Symptoms

  • Traction or stability control lamp on
  • Reduced Steering Assist message, sometimes without actual loss of assist
  • Stability control switched off

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0460

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication