OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0450

Rear Wheel Steering Position Sensor Circuit

C0450 does not occur in the accessible J2012 lists. Its only public manufacturer use is GM: bulletin PIC5321A for the 2010–2011 Cadillac DTS links C0450 with Service Power Steering and Service Brake System messages, a lit check-engine lamp and cycling door locks, caused by an engine harness chafed through on the transmission. The DTS has no rear-wheel steering, so GM evidently uses the number for a front steering function; the bulletin does not name it. For the rear-steer meaning of the title: systems such as ZF's AKC set rear toe electrically, a patent for an electric rear-steer actuator reads ball-screw travel with Hall elements, and a ONE80 patent drives the wheels back to straight ahead and locks out rear steer once the position signal is lost or wrong.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number4 / 50

Possible causes

  • Wiring harness chafed or pinched (GM DTS case at the transmission) high
  • Faulty position sensor in the rear steering actuator medium
  • Corroded or loose connector on the actuator low

Symptoms

  • Steering or brake system warning message in the cluster
  • Rear steering locked straight ahead, larger turning circle
  • Check-engine lamp on some GM models

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0450

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication