OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0405

Traction Control Active Too Long

C0405 could not be found in any public source, including the public J2012 tables, GM's PIP5094 and NHTSA's bulletin index, and no maker publishes a time limit for a traction control intervention. So only the monitored function is outlined. Traction control brakes a spinning drive wheel and asks the engine for less torque; Bosch counts it among the functions of ESP. In the 2004 Saab 9-5 the return pump runs throughout every TCS or ESP braking event while the control valves raise, hold and lower pressure, and the function lamp lights only when braking and torque reduction act together. An intervention lasting far longer than expected suggests a false wheel speed or a stuck valve; how and when a system then reacts is maker specific.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number4 / 05

Possible causes

  • Erratic wheel speed signal faking continuous wheel spin high
  • Spare wheel or tires of different size on one axle medium
  • Hydraulic control valve sticking in the brake unit low

Symptoms

  • Traction control lamp flashes for a long time or stays on
  • Engine power reduced and a wheel braked without reason
  • Hot or smelling brake on one wheel

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0405

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication