C0400
Traction Control Solenoid Valve Circuit
C0400 is publicly undocumented: none of the published J2012 lists contains it, neither does GM's PIP5094, and a search of NHTSA's bulletin index finds nothing. Only the part from the title is described here. For traction control the brake unit must build pressure without the driver pressing the pedal. In the TC/ABS unit of the 2004 Saab 9-5 one pressure build valve and one pressure release valve per front wheel are used only in TCS mode, while the return pump supplies fluid; Bosch likewise places all control valves and the pump in one hydraulic unit. Each time the ignition comes on, the Saab module tests each valve with a 20 ms pulse; if one fails it switches off ESP, TCS and ABS and lights ABS, brake and ESP OFF lamps.
Possible causes
- Open or shorted coil of a traction control valve medium
- Valve driver inside the brake control module failed medium
- Poor supply or ground of the brake control module low
Symptoms
- ABS, traction control and stability warning lamps on
- Wheels spin freely when pulling away on slippery ground
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0400
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.