C0389
Transfer Case Low Range Switch Circuit Malfunction
There is no evidence that any maker uses C0389. Neither the publicly available J2012 tables nor GM's chassis keyword bulletin PIP5094 nor NHTSA's index name it, so only the switch named in the title is described. The low range signal matters beyond the transfer case: under FMVSS 126 the stability control must return to its default mode at each new ignition cycle, yet it may stay in a reduced mode if the driver chose low-range 4WD on the previous cycle. A wrong low range signal can therefore affect ESC as well as shifting. GM reads range from a gear position sensor and flags a mismatch as C0398 (PIP5220B); Nissan renewed the range sensor on 2023 Frontier and Titan models. Typical results are a 4WD warning and 4LO that will not engage or release.
Possible causes
- Damaged or corroded wiring of the low range switch high
- Low range switch or range sensor defective medium
- Transfer case stuck between ranges so no switch position is reached low
Symptoms
- 4LO cannot be selected or left
- 4WD warning and low range indicator flashing
- Stability control behaves unexpectedly after restart
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0389
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.