OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0388

Transfer Case High Range Switch Circuit Malfunction

No public source can be found for C0388; neither the reachable J2012 tables nor GM's PIP5094 or NHTSA's index of bulletins contain it. The text therefore covers only the title part. A transfer case reports its engaged range to the control module through a switch or position sensor; the high range is the normal road gear. Makers that document this file it under their own numbers. GM checks circuits 7477 to 7479 between gear position sensor B2227 and the module when C0398 repeats on 2014–15 trucks. Since a 2014 calibration the GM module also compares the stored shift shaft position at shutdown with the value at start and, beyond 5 degrees of drift, holds 4HI. Nissan replaced the transfer case range sensor on 2023 Frontier and Titan in campaign PC984.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number3 / 88

Possible causes

  • Open, shorted or corroded wire or terminal of the range switch high
  • Range switch or position sensor on the transfer case defective medium
  • Transfer case module calibration needing an update low

Symptoms

  • Service 4WD or 4x4 warning displayed
  • Range indicator does not match the selected gear
  • Shifts out of high range refused

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0388

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication