C0327
Encoder Motor
C0327 has no entry in the published J2012 tables, but GM documents it: the transfer case control module (TCCM) of 4WD trucks and SUVs uses it for the encoder that tells the module where the motor has turned the shift shaft. Dorman's instruction sheets for GM pickups and SUVs from 1998 to 2009, the Saab 9-7X included, describe it as a voltage outside the expected window on the encoder circuit; play in a worn shift shaft can also make the encoder report a false position. GM bulletin PIP5098 for the 2004–12 Colorado and Canyon links it to a Service 4WD message after cold or damp standing and points to ground circuit 550 of the encoder motor channels, terminal F7 of connector 2 in the underhood fuse block. PIP5094 lists the number among GM chassis codes.
Possible causes
- Loose or corroded ground terminal for the encoder channels (GM circuit 550) high
- Damaged encoder harness or water in the motor connector medium
- Encoder in the shift motor assembly defective medium
- Worn shift shaft lets the encoder read a false position low
Symptoms
- Service 4WD message or flashing 4WD switch lamps
- Transfer case does not shift or shifts only intermittently
- Fault appears mainly on the first drive after cold or damp standing
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0327
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.