C0308
Transfer Case Motor A/B Circuit Low
None of the publicly available J2012 lists contains C0308, and no source links it to a ride height sensor. GM uses it for the transfer case shift motor: PIP5094 lists the number, AA1Car's GM chart labels it Motor A/B Circuit Low, and Dorman's guide for its replacement motor covers 1998–2005 S10 Blazer, Sonoma, Tahoe, Suburban, Yukon, Silverado, Sierra, Escalade, Avalanche and related trucks. The transfer case module sets it when it finds motor control line A or B shorted to ground, or when the feedback voltage on those lines is far too low. Once stored, the module stops every 4WD shift and lights Service 4WD. The sibling codes C0309 and C0310 cover a high voltage and an open circuit on the same lines.
Possible causes
- Motor control wire A or B chafed against the frame and grounded high
- Shift motor internally shorted medium
- Transfer case control module output stage faulty low
Symptoms
- Service 4WD lamp on
- No shifting into or out of four-wheel drive
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0308
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.