OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0307

Inlet Valve Rear Right Performance

C0307 has no public trace: not in the accessible J2012 lists, not in GM's PIP5094 or AA1Car's GM table, and not in the NHTSA bulletin index. Described here is the rear right inlet valve of the title. In an ESP valve block it does more than ABS work: Saab explains for the 9-5 that both valves of each rear wheel are also driven during stability interventions, so that pressure can be shaped at all four corners while the pump runs. A rear right inlet valve that answers slowly therefore spoils both ABS stops and stability corrections that brake the right rear wheel. The self-test at ignition-on catches coil faults; hydraulic slowness shows up during regulation. Either way ABS and ESP are switched off with their lamps.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number3 / 07

Possible causes

  • Rear right inlet valve slowed by dirt or aged fluid medium
  • Coil of the valve or brake module output defective medium
  • Poor contact between brake module and valve block low

Symptoms

  • ABS and stability control lamps on
  • Stability control unavailable

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0307

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication