C0305
Inlet Valve Rear Left Performance
C0305 is missing from the published J2012 lists and is not described by any maker as an ABS valve code. GM does use it: PIP5094 lists the number, and AA1Car's GM table calls it Front Speed Sensor Malfunction, the partner of C0300 in the block before the transfer case motor codes. The title refers to the rear left inlet valve. Besides ABS work, the rear inlet valves carry the electronic brake force split: on the 2011 Saab 9-5 the TRW module lowers rear pressure by cycling the rear valves instead of using a mechanical proportioning valve, and it also uses the valves to hold pressure for hill start assist. A sluggish rear left inlet valve can let that wheel lock early or brake too little, and the module then disables ABS and stability control.
Possible causes
- Rear left inlet valve sticking from contaminated fluid medium
- Valve coil or brake module driver defective medium
- On GM 4WD trucks, front speed sensor fault in the transfer case system (GM meaning of the number) low
Symptoms
- ABS and brake warning lamps on
- Rear wheel locking early or hill start assist unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0305
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.