OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0304

Outlet Valve Front Right Performance

No public source confirms C0304; searches of the J2012 tables at hand, of GM's keyword bulletin PIP5094, of AA1Car and of the NHTSA bulletin index came up empty. The title concerns the front right outlet valve, the part that bleeds pressure off that caliper when the wheel starts to lock. In the TRW brake system of Saab's 2011 9-5, the EBC450, the module first holds pressure by closing the inlet valve and only then opens this dump valve, sending fluid into the accumulator, from where the pump returns it. A valve that will not open lets the front right wheel lock; a valve that does not reseal drains pressure, gives a long pedal and can make the car pull left. Saab's ESP version uses the same valves for stability braking, so the fault disables ABS and ESP alike.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number3 / 04

Possible causes

  • Outlet valve not resealing because of dirt in the seat medium
  • Valve coil or brake module output stage defective medium
  • Accumulator or return pump unable to take the released fluid low

Symptoms

  • ABS and stability control warning lamps on
  • Long brake pedal or front right wheel locking

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0304

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication