OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0303

Inlet Valve Front Right Performance

C0303 has no public evidence at all: the accessible J2012 lists, GM's PIP5094 keyword list, AA1Car's GM table and the NHTSA index all lack it. The title points to the front right inlet valve. A performance fault here means the brake module saw the valve respond wrongly, for example a coil current out of range during the self-test or a wheel that does not hold pressure as commanded. In the Saab 9-5 ESP valve block twelve solenoid valves sit together, including an inlet/outlet pair for every wheel, and any valve fault switches ABS, traction and stability control off and lights their lamps. A front right inlet valve that stays shut leaves that wheel underbraked, so the car may pull to the left; one that will not close lets the wheel lock in ABS braking.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number3 / 03

Possible causes

  • Inlet valve stuck from debris after brake work medium
  • Open or shorted valve coil inside the hydraulic unit medium
  • Low supply voltage to the valve circuit during self-test low

Symptoms

  • ABS, traction and stability control lamps on
  • Car pulls to the left when braking

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0303

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication