OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0301

Air Suspension Compressor Relay

No reachable J2012 table, no GM keyword list such as PIP5094, no AA1Car chart and no NHTSA bulletin carries C0301. Makers that document this fault use their own numbers. Mercedes-Benz stores open-circuit compressor actuation on AIRMATIC cars as C1562 and, after moisture froze in the compressor and the start current blew the 40 A fuse, replaces compressor, fuse and relay together. Lexus reports C1752 on the 2013–17 LS460 when water corrodes the height control compressor, and Volvo tells dealers to swap fuse and compressor on 2017–18 models. The relay switches the compressor's heavy current on command of the suspension module. A worn compressor overloads its contacts; a relay that sticks closed keeps it running and can overheat it.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number3 / 01

Possible causes

  • Relay contacts burnt or welded by excessive compressor current high
  • Worn, seized or water-damaged compressor drawing too much current medium
  • Blown compressor fuse or corroded relay socket and wiring medium

Symptoms

  • Air suspension warning message, compressor silent
  • Vehicle sinks or leans after standing
  • Compressor runs continuously when the relay sticks

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0301

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication