OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0295

Steering Sensor Indicates Bias

Public evidence for C0295 is lacking. The code appears neither in the publicly available J2012 tables nor in GM's PIP5094 keywords, the AA1Car chart, the Saab manuals or the NHTSA bulletin index. What remains is the fault the title names, a steering angle sensor whose zero point no longer matches straight-ahead driving. GM stores this case as C0710 5A on the 2011 Saab 9-5, comparing steering angle with yaw rate; ESP and the hill start aid then stay off for the ignition cycle. The earlier Saab 9-5 disables the system once the stored correction reaches 15 degrees. GM bulletin 16-NA-151 cures a 2016 Malibu C0460 after a voltage dip by turning the wheel lock to lock. Bosch measures the angle with two magnet gears.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 95

Possible causes

  • Wheel alignment or steering parts changed without recentring the sensor high
  • Calibration lost after battery disconnection or a voltage dip medium
  • Steering angle sensor or clock spring assembly faulty low

Symptoms

  • Stability control warning lamp on
  • Steering wheel off centre when driving straight
  • Unexpected stability control interventions

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0295

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication