OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0290

Brake Pedal Stroke Sensor Circuit Malfunction

C0290 does not show up in the publicly available J2012 lists, and no maker ties it to a pedal stroke sensor. GM lists the number in PIP5094; AA1Car's GM brake table translates it as Lost Communications With PCM, a data bus fault between brake and engine module. A pedal stroke sensor measures how far the driver pushes the pedal or brake rod. Bosch builds such sensors on the Hall principle for up to 45 mm of travel or 55 degrees of rotation, and its iBooster reads the pedal through a differential travel sensor before its motor adds force. Electric boosters and blended regenerative brakes depend on this signal; when its circuit fails, the system falls back to an unassisted or less refined mode and the brake warning appears.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 90

Possible causes

  • Damaged wiring or connector at the pedal travel sensor medium
  • Pedal travel sensor failed or its magnet displaced medium
  • Data bus fault between brake and engine module (GM meaning of the number) low

Symptoms

  • Brake warning lamp on
  • Higher pedal effort or changed pedal feel
  • Regenerative braking reduced on hybrid or electric cars

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0290

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication