OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0273

Brake Booster Pressure Sensor Circuit Malfunction

Neither the reachable J2012 lists nor any maker describe C0273 as a booster pressure sensor code. GM's PIP5094 does include the number, and AA1Car translates it, like C0271 and C0272, as EBCM Malfunction, meaning an internal fault of the brake module. In that case the module is normally replaced after supply, ground and connector have been checked. The sensor in the title measures the vacuum or pressure stored in the brake booster. GM's patent US7467544 compares it with manifold vacuum at closed throttle and flags a reading drifted high or low, and can even correct a moderate drift. Electrical faults of that sensor are usually stored under the powertrain codes P0556 to P0559.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 73

Possible causes

  • On GM vehicles internal fault of the brake control module medium
  • Low supply voltage, poor ground or corroded module connector medium
  • Faulty booster pressure sensor or its wiring low

Symptoms

  • ABS and traction warning lamps on
  • ABS and stability functions disabled

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0273

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication