C0268
Brake Pump Run Time Exceeded
C0268 appears in no public J2012 table. It is a GM number named in PIP5094, and AA1Car repeats for it the wording of C0267, Pump Motor Circuit Open/Shorted. A run-time limit as in the title is documented by no maker for this code. Why pump run time matters is shown by a Kelsey-Hayes patent for GM-type ABS: one DC motor drives the return pumps that empty the low-pressure accumulators after the dump valves open; if the motor runs too slowly the accumulators fill and pressure at the wheel can no longer be lowered. The patent starts the motor at full voltage for about 0.3 s, then regulates speed by PWM and back EMF. A motor running too long or too slow points to wear, low voltage or a poor ground.
Possible causes
- Worn or sluggish ABS pump motor medium
- Low supply voltage or poor ground at the pump motor circuit medium
- Open or shorted pump motor wiring or connector (GM wording) medium
Symptoms
- ABS warning lamp on, ABS and traction control disabled
- Pump runs audibly long during self-test or ABS events
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0268
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.