OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0267

Brake Pump Motor Circuit

C0267 is missing from the accessible J2012 lists; GM has used it with two meanings. AA1Car's table of older GM ABS codes names it Pump Motor Circuit Open/Shorted, matching the title, and PIP5094 confirms the number. In the later GM Global A systems, as in the 2011 Saab 9-4X, it reads Low Brake Fluid Indicated: the brake module sees the level switch circuit grounded, or the level below MIN, for 60 seconds, disables traction and stability control and asks the cluster for the brake lamp. Bulletin PIC6156 for the 2014 to 2016 Malibu traces false low-fluid messages with C0267 to a missing ground ring at stud G203; PIT5499 for the 2015 to 2016 Colorado and Canyon to water in the brake module connector.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 67

Possible causes

  • On newer GM vehicles brake fluid below MIN (check pad wear and leaks) high
  • Loose ground (GM G203) or corroded brake module connector medium
  • On older GM ABS open or shorted pump motor circuit or worn pump motor medium

Symptoms

  • Red brake warning lamp or low brake fluid message
  • Traction and stability control disabled, ABS lamp on with older systems

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0267

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication