C0258
Brake Booster Vacuum Sensor Circuit
No public record of C0258 exists: the publicly available J2012 lists, the NHTSA bulletin index and the GM and Saab indexes all lack it. Only the sensor named in the title can be described. A booster vacuum sensor tells the control unit whether enough vacuum is stored for power-assisted braking; GM needs it on cylinder-deactivation engines, which return to all cylinders when vacuum gets low. GM patent US7076347 checks the sensor with the throttle almost closed: over one second the gap to manifold vacuum must shrink to near zero. GM patent US7467544 also catches a reading biased high or low. Electrical faults of such a sensor are normally stored as powertrain codes P0556 to P0559 rather than as a chassis code.
Possible causes
- Open or shorted sensor supply, ground or signal wire medium
- Faulty or drifting vacuum sensor medium
- Leaking vacuum hose, check valve or booster diaphragm low
Symptoms
- Warning lamp or message about brake assistance
- Cylinder deactivation or engine stop-start inhibited on affected vehicles
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0258
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.