C0246
ABS/TCS Control Module Internal Performance
The accessible J2012 tables lack C0246, and an internal brake module fault is not what any maker uses it for. Two makers use it differently. In the 2011 Saab 9-5 (GM) it is set by other modules on the fast CAN network when the periodic wheel speed message from the brake module stops arriving: Invalid Data Received From Electronic Brake Control Module. Toyota stores it in the skid control ECU of the 2014 to 2020 4Runner together with C0226, C0236 and C0256; Tech Tip T-TT-0597-20 traces the ABS lamp to a ground that fluctuates when aftermarket LED or HID headlight bulbs are fitted. The meaning therefore depends on make and on which module holds the code. On GM, start with the wheel speed sensors.
Possible causes
- On GM vehicles wheel speed message from the brake module missing on the CAN bus medium
- On Toyota 4Runner unstable ECU ground caused by aftermarket LED or HID headlight bulbs medium
- Damaged brake module connector or ground wires low
Symptoms
- ABS warning lamp on
- Functions that use wheel speed run degraded in other modules (GM)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0246
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9650/2011/5-brakes/tcs-esp/fault-diagnosis-diagnostic-trouble-codes/dtc-b0000-c0055-c0246-c1207-c1210-c1221-c1228-or-c1232-c1235
- static.nhtsa.gov/odi/tsbs/2020/MC-10172379-9999.pdf
- saabwisonline.com/9-5-9650/2011/5-brakes/tcs-esp/technical-description/abs-description-and-operation