C0245
Wheel Speed Sensor Frequency Mismatch
C0245 is missing from the reachable J2012 lists but is a documented GM code: PIP5094 lists it, AA1Car's GM table names it Wheel Speed Sensor Frequency Error, and the 2010 and 2011 Saab 9-5 manuals call it Wheel Speed Sensor Frequency Malfunction. The active sensors there get 12 V from the brake module and return a square wave whose frequency gives the wheel speed. The check runs above 9 mph with no open-circuit sensor code, brake released and no cornering; if one wheel differs from the rest by more than 20 percent, ABS, hill start assist, traction and stability control shut down for that ignition cycle and three warning lamps light. GM first checks tyre size and pressure, then the tone ring and sensor seating.
Possible causes
- Tyre with wrong size or pressure on one wheel high
- Damaged or contaminated tone ring or magnetic encoder medium
- Sensor not seated correctly or excessive wheel bearing play medium
Symptoms
- ABS, traction/stability and brake warning lamps on together
- ABS, stability control and hill start assist disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0245
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.