OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0242

PCM Indicated Traction Control Malfunction

C0242 is a GM brake module code that the accessible J2012 lists do not contain. The Saab 9-5 and 9-4X of 2011 describe it as Powertrain Control Module Indicated Traction Control Malfunction, and the GM bulletin PIC4740C for the 2007 Cadillac STS calls it ECM Indicated TCS Malfunction. During traction control the brake module asks the engine module over the data bus for less torque. When the engine module holds certain faults of its own, it replies that it cannot cut torque, and the brake module stores C0242. Traction and stability control then stay off for the ignition cycle and their lamp comes on. The real fault sits in the engine or transmission module, so its codes are read first; in PIC4740C a loose transmission connector X1 was the cause.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 42

Possible causes

  • Stored fault in the engine control module that blocks torque reduction high
  • Loose or poorly seated terminals at the transmission connector (GM PIC4740C) medium
  • Faulty engine control module, rarely the brake module low

Symptoms

  • Traction or stability control lamp on, systems disabled
  • Check engine lamp or reduced engine power from the engine side fault

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0242

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication