OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0241

ABS Warning Lamp Control Circuit

None of the reachable J2012 tables contain C0241, and a warning lamp meaning is documented nowhere. GM's PIP5094 keyword list includes the number; AA1Car's table of GM ABS codes names it EBCM Control Valve Circuit. Saab used it in the TC/ABS 5.3 system of the first 9-5 model year, 1998, for a bad engine torque limitation signal: if the Trionic engine module has a torque control fault, a break in that line or the brake module carries the wrong engine variant, the engine side sends a fixed 96 percent pulse ratio and traction control shuts down with the TCS OFF lamp lit. The lamp in the title is required by FMVSS 135, which demands a brake warning indicator for any electrical failure of the antilock system. Check which system and maker stored the code before testing anything.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 41

Possible causes

  • On Saab 9-5 (1998) open or shorted torque limitation line or throttle fault in the Trionic engine module medium
  • Brake module programmed for the wrong engine variant low
  • On GM vehicles fault in a control valve circuit driven by the brake module medium

Symptoms

  • TCS OFF or ABS warning lamp on
  • Traction control not working
  • Check engine lamp on at the same time when the engine module is the source (Saab)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0241

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication