C0235
Wheel Speed Sensor Signal Erratic
C0235 does not show up in the publicly available J2012 lists. GM's bulletin PIP5094 names the number among chassis codes for cars and light trucks up to 2014, and AA1Car's GM-based ABS table renders it as Rear Wheel Speed Signal Circuit Open; an erratic-signal meaning is not documented by any maker. Taken by its title, the code concerns a speed signal that jumps or briefly drops out while the wheel turns steadily. HELLA's workshop guide names broken wires, internal shorts, heavy dirt and a growing air gap as the usual reasons, with pseudo control interventions or locking wheels as symptoms, and recommends comparing the wheel signals in live data and on a scope. Bosch's Hall sensors turn the encoder field into square current pulses, so a loose plug shows as missing pulses.
Possible causes
- Intermittent wire break or loose connector, often at moving harness sections high
- Dirt, rust or metal debris on the sensor, enlarged air gap medium
- Wheel bearing play letting the encoder wobble low
Symptoms
- ABS lamp comes and goes
- Pulsing pedal or ABS intervention at low speed without reason
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0235
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.