OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0220

ABS Valve Block Supply Voltage

C0220 has not turned up in any accessible J2012 table, NHTSA bulletin or maker index; there is no public evidence of its use. The title refers to the voltage that feeds the solenoid valves of the hydraulic unit. In GM-designed systems such as the TRW EBC450 of the 2011 Saab 9-5, the brake control module itself feeds both the valve coils and the pump motor. A Hella/Lucas patent routes battery voltage to all valves through the contact of a fail-safe relay and checks the switched voltage behind it; a wrong value drops the relay and lights the lamp. Saab's older ESP shows a typical limit for a supply fault, below 9 V for 0.5 s above 6 km/h, stored there as C1532. A weak battery, a blown fuse, poor grounds or charging faults are frequent causes.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number2 / 20

Possible causes

  • Low system voltage from a weak battery or charging fault high
  • Blown fuse or high resistance in the module supply line medium
  • Poor ground connection of the brake control module medium
  • Faulty valve supply relay or driver inside the module low

Symptoms

  • ABS, brake and stability lamps on, often intermittently
  • ABS and traction control unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0220

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication