C0200
ABS Solenoid Valve Front Left Circuit
Neither the reachable J2012 tables nor NHTSA's bulletin index nor the manufacturer indexes checked contain C0200, so no published vehicle is known to use it. Its title, a circuit fault of the front left ABS solenoid valves, matches what Saab records as C2450 on 9-5 cars equipped with Bosch 5.3 TC/ABS. Each wheel channel of such a unit has an inlet valve that is open at rest and an outlet valve that is closed at rest, so the controller can hold, lower or rebuild pressure at this wheel alone; in Saab's ESP version both valves also act during stability braking. A shorted or open coil shows up in the brief valve test after key-on, which MOTOR captured as one short current pulse per coil, after which ABS and the functions built on it stay off and the lamps light.
Possible causes
- Open or shorted coil of a front left valve high
- Poor contact between valve coils and control module (solder joint, contact strip) medium
- Faulty valve driver in the control module low
Symptoms
- ABS warning lamp on from key-on, ABS inactive
- Traction and stability control also switched off
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0200
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.