C0168
Right Rear ABS Inlet Solenoid Circuit Malfunction
C0168 has no public trace: it is missing from the accessible J2012 tables, from the NHTSA bulletin index and from the manufacturer pages checked, where Saab for instance uses C2485 for the rear right valves. Taken at face value it covers the inlet solenoid of the right rear brake, which isolates that caliper from master cylinder pressure while the module regulates the wheel. Typical findings are a coil with an open winding, a short between coil and housing, or a corroded plug at the valve block. Toyota and Denso patented the self-test that checks each solenoid for these faults and then trips a cut-off relay, while MOTOR documents how the ATE module times test pulses per valve and shuts anti-lock down when one is wrong.
Possible causes
- Open winding in the rear right inlet coil high
- Short between coil and housing medium
- Corroded plug at the valve block medium
Symptoms
- ABS lamp on, often directly at key-on
- No anti-lock control on any wheel
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0168
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.