OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0163

Left Rear ABS Outlet Solenoid Circuit Malfunction

None of the reachable J2012 lists, maker indexes or NHTSA bulletins mention C0163, so its use cannot be shown for any vehicle. The title names the outlet solenoid of the left rear brake, the valve that opens during anti-lock control to dump caliper pressure toward the return pump and lets the wheel recover. If it cannot open, the rear wheel may lock; if it sticks open, the rear brake loses pressure during regulation. Electrically, controllers verify the coil with short current pulses: MOTOR describes the ATE module checking every outlet and inlet coil in a fixed sequence and flagging the missing one, and the Toyota/Denso patent cuts all valve power through a relay after such a finding. Bosch places these valves together with the pump in the hydraulic unit.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number1 / 63

Possible causes

  • Rear left outlet coil open or shorted high
  • Outlet valve mechanically stuck by contaminated fluid low
  • Poor contact at the hydraulic unit connector medium

Symptoms

  • ABS warning lamp on
  • Unstable rear axle under hard braking without ABS

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0163

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication