OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0158

Left Rear ABS Inlet Solenoid Circuit Malfunction

C0158 is publicly undocumented: it appears in no accessible J2012 table, NHTSA bulletin or manufacturer index. Saab, for example, reports the rear left valve group under C2415 instead. The title points to the electrical circuit of the inlet solenoid for the left rear brake. That valve stays open during normal braking and closes when the rear wheel starts to lock, trapping pressure in the caliper. Toyota and Denso patented a routine check that tests every actuator solenoid for breaks and shorts, raises a fault flag, lights the warning lamp and trips a cut-off relay so the brakes revert to plain pedal operation. MOTOR's measurements on the ATE system add that a coil with wrong resistance reaches its current limit too fast or too slowly.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number1 / 58

Possible causes

  • Rear left inlet coil open, shorted or with wrong resistance high
  • Corrosion at the hydraulic unit connector medium
  • Failed output stage in the control module low

Symptoms

  • ABS warning lamp on, anti-lock switched off
  • Rear wheels can lock under hard braking

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0158

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication