C0148
Right Front ABS Outlet Solenoid B Circuit Malfunction
C0148 is listed neither in the publicly available J2012 tables nor in maker indexes or NHTSA bulletins, so what the letter B stands for cannot be verified. The title suggests a second release solenoid for the right front wheel, as some hydraulic units pair two valves per channel. In any ABS unit the outlet side lets fluid escape from the caliper so the wheel can spin up again. Controllers check each coil electrically; a MOTOR article on the ATE system shows the module sending short test pulses to every inlet and outlet coil and setting a code within about 65 ms of key-on if one pulse is missing or too strong. A Toyota/Denso patent pairs such open/short checks with a relay that cuts all valves. With the code stored, the anti-lock function is usually off.
Possible causes
- Solenoid coil open, shorted or out of resistance range high
- Corroded contact between coil and control module medium
- Failed output stage in the ABS module low
Symptoms
- ABS warning lamp on immediately after key-on
- Anti-lock and related functions switched off
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0148
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.