OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0141

Left Front ABS Inlet Solenoid Circuit

C0141 is not listed in the accessible J2012 tables. Saab documents it for the Bosch 5.3 TC/ABS of the 9-3 and 9-5 from 1998 and for the later 9-5 ESP as the left pressure-increase valve, kept apart from the wheel valve group code C2450; GM's chassis keyword list (PIP5094) includes it, and AA1Car's GM-based table calls it Left TCS Solenoid #1. Describing it as the left front inlet valve is therefore one reading of a valve that builds pressure in the left front brake circuit, above all during traction control. Saab tests the coil without pause for breaks and shorts, with the rolling check running above 6 km/h; a fault shuts down ABS, TCS and ESP and lights several warning lamps at once. Coil, wiring and the valve block are the usual suspects.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number1 / 41

Possible causes

  • Open or shorted coil of the left pressure-increase valve high
  • Poor contact between control unit and valve block medium
  • Failed valve driver in the control module medium

Symptoms

  • ABS, brake and central warning lamps on
  • TCS/ESP off indicator lit, no ABS, TCS or ESP function

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0141

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication