C0136
Stop Lamp Switch Circuit
No public J2012 list, NHTSA bulletin or manufacturer table carries C0136, so it cannot be matched to a vehicle. Its title is word for word that of C0205, and at GM the brake switch input of ABS/TCS modules is C0161; which number a given car uses can only come from its own service data. The function itself is well described. Bosch patented a monitor for ABS and traction control units that stores a suspected short or stuck switch when the signal is already present at ignition-on, and an open line when no signal appears during a later drive; with automatic gearboxes it waits for three repeats. A second Bosch patent rechecks a switch reported stuck high by demanding a clean low-high-low pattern at standstill. Stop lamps and cruise control share this signal.
Possible causes
- Brake light switch misadjusted, worn or sticking high
- Open or short in the switch circuit or connector medium
- Blown stop lamp fuse low
Symptoms
- Stop lamps stay on or do not work
- Cruise control will not engage or cancels
- ABS or stability warning lamp may come on
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C0136
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.