C0121
Valve Relay Circuit Malfunction
C0121 is absent from the accessible J2012 lists. GM includes it in the chassis code keyword list of bulletin PIP5094 (2013), and AA1Car's ABS code table, which follows GM numbering, names it Valve Relay Circuit Malfunction. This relay passes battery voltage to all solenoid valves of the hydraulic unit, while the controller grounds each valve on its own. A Hella/Lucas patent describes the monitoring: the module checks the relay coil current and the voltage behind the contact, and if either is wrong it drops the relay so the valves fall back to their rest position; a Toyota/Denso patent uses a cut-off relay in the same way. Ordinary braking remains, but ABS and the functions built on it are lost and the warning lamp lights. A sticking contact, a blown valve feed fuse or a poor module ground are typical causes.
Possible causes
- Blown fuse or poor battery feed to the valve relay high
- Corroded or loose ground of the brake control module medium
- Valve relay contact sticking or burnt (relay often inside the module) medium
Symptoms
- ABS warning lamp on, often together with traction or stability lamp
- No anti-lock action, wheels can lock under hard braking
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0121
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.