C0112
ABS Activation Frequency Too High
C0112 is not found in any accessible J2012 table or in the NHTSA bulletin index, and no manufacturer documents it publicly. Read literally, the title flags anti-lock control that starts again and again although the wheel situation does not justify it, as opposed to one overlong event (C0111). Nissan and Unisia patented a counter that sums pressure-release time across successive control cycles; when it keeps growing past roughly 0.5 s because one wheel speed sensor reads too high, that sensor is judged faulty and left out of the reference speed. The Bosch patent of 1988 switches ABS off when slip persists without braking. Plausible causes are a tyre of the wrong size, a cracked or loose sensor ring and electrical noise on a speed signal.
Possible causes
- Tyre or wheel of the wrong rolling circumference high
- Cracked, loose or contaminated sensor ring medium
- Interference or intermittent contact on a wheel speed sensor circuit medium
Symptoms
- ABS kicks in at low speed or on dry road without reason
- ABS warning lamp on after repeated interventions
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0112
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.