C0111
ABS Activation Excessively Long
No accessible J2012 table, manufacturer index or NHTSA bulletin lists C0111, so the code cannot be traced to any published application. The title describes a plausibility monitor rather than a wiring fault: the controller notices that an anti-lock intervention, or one of its pressure-release phases, lasts longer than makes physical sense. Bosch patented such a guard in 1988. If a wheel shows slip above a threshold for about 20 s while the driver is not braking, the controller first becomes less sensitive and then switches ABS off and lights a lamp; a spare wheel or uneven tyre pressures were the named triggers. A Toyota/Denso patent ends a pressure reduction after about 3 s and checks for abnormal prolongation. Mismatched tyres or a weak speed signal are the likely roots.
Possible causes
- Spare wheel, mixed tyre sizes or very uneven tyre pressures high
- Weak or disturbed wheel speed signal (air gap, dirty sensor ring) medium
- Sluggish valve in the hydraulic unit prolonging a control phase low
Symptoms
- ABS warning lamp on, anti-lock function switched off
- Pedal pulsing or long release phases during gentle braking
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0111
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.