OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0110

ABS Pump Motor Circuit Malfunction

C0110 does not appear in the accessible J2012 code tables; it is documented by General Motors, whose brake modules use it for the electric motor of the ABS return pump. In the Saab 9-5 (2010–2011) and 9-4X service data the motor sits in the brake pressure modulator valve while its relay is inside the EBCM; the module leaves the motor off during ordinary braking and runs it only for ABS, traction or stability intervention. The 9-5 logs symptom 06 after an open or grounded feed lasting 0.01 s, the 9-4X uses a 1.8 s window, and symptom 61 marks a seized or worn motor. ABS, TCS and ESC are then disabled for the ignition cycle with ABS and brake lamps lit. A GM bulletin for the 2014 Cadillac ELR also lists C0110.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number1 / 10

Possible causes

  • Open or high-resistance pump motor supply or ground (fuse, connector, ground point) high
  • Seized or worn pump motor in the modulator valve assembly medium
  • Faulty pump motor relay inside the brake control module medium

Symptoms

  • ABS and red brake warning lamps on
  • Traction and stability control indicator on, systems disabled
  • No ABS intervention on slippery surfaces

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0110

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication