OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C00A8

4WD/AWD Transfer Case Unit Actuator Position Sensor B

C00A8 is the second position signal of the transfer case actuator. Whether B is a redundant copy of A or tracks a different part, the motor or the cam, is not published by any maker; BorgWarner, for example, puts a contact probe on the shift drum cam instead of the motor because a torsion spring sits in between, and reads five plateaus from 2WD high to 4WD low. Stellantis lists C00A8-13, circuit open, in TSB 08-237-23 and in 08-122-24, which replaced 08-239-23 for 2023 Wagoneer and Grand Wagoneer built 16 to 24 June 2023: the MIL must be on, and a loose shift motor connector is the cause, verified by pushing, pulling and pushing the plug again. Ford SSM 52152 names C00A8:11 and :13 on 2020–2023 Explorer/Aviator. Magna's Hall sensor patent shows a sensor that can be exchanged from outside.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / A8

Possible causes

  • Shift motor connector not latched (Stellantis 2023) high
  • Harness damage at the heat shield near the transfer case (Ford) medium
  • Position sensor B defective low

Symptoms

  • MIL illuminated (Stellantis), wrench indicator (Ford)
  • 4WD Service light, four-wheel drive not available

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C00A8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication